User Guide

Software Functional Overview
3-8 FIC M785 Service Manual
3.3.7 PCMCIA
The PCMCIA controller chip of the notebook provides the following features:
• Support for only single CardBus slot (two type II stacked)
• Individually accessed, dual-buffer implementation
• Support for 3.3v, 5v and 12v (flash programming) cards
3.3.8 LED Indicator
The table below lists down the functions of the Status LED indicator:
Indicator Function Description
IDE accessing LEDŒ
This LED will turn on while accessing the IDE Device.
FDD accessing LEDŒ
This LED will turn on while accessing the FDD Device. (M785
No support)
Battery Charging LED
Turn on (Amber) – Battery is under charging mode
Turn off – Battery full charged or no battery
CapsLock LEDŒ
This LED will turn on when the function of CapsLock is active.
ScrollLock LEDŒ
This LED will turn on when the function of ScrollLock is active.
NumLock LEDŒ
This LED will turn on when the function of NumLock is active.
Power Status LED
Green – System is powered on.
Green Blinking- System is entered suspend mode.
Amber – Battery Low.
Mail LEDŒ
This LED will turn on while Mail was arrived.
GPRS statusŒ
None
i Π- There LEDs will be turned off during Suspend mode.
3.3.9 Hot Keys Definition
All Hot keys must be active at all times under all operation systems.
l Hot Keys by Internal Keyboard
Hot Key Function Handler
Fn + F3 Toggle Display
(LCD/CRT/LCD&CRT)
BIOS Handler
Fn + F4 System entered into standby mode BIOS Handler
Fn + F6 System Speaker On/Off BIOS Handler
Fn + F8 Brightness Increase Controlled by PMU08
Fn + F9 Brightness Decrease Controlled by PMU08
ScrLock Scroll Lock
Internet Button Internet Function Key Controlled by Driver
Mail Button Mail Function Key Controlled by Driver
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com