User Guide

Software Functional Overview
3-8 FIC A985 Service Manual
3.3.7 PCMCIA
The PCMCIA controller chip of the notebook provides the following features:
•
Support for only single CardBus slot (two type II stacked)
•
Individually accessed, dual-buffer implementation
•
Support for 3.3v, 5v and 12v (flash programming) cards
3.3.8 LED Indicator
The table below lists down the functions of the Status LED indicator:
Indicator Function Description
PowerButton LEDv
Those LEDs indicate user the button’s location in the dark.
IDE accessing LEDŒ
This LED will turn on while accessing the IDE Device.
FDD accessing LEDŒ
This LED will turn on while accessing the FDD Device.
Battery Charging LED
Turn on (Amber) – Battery is under charging mode
Turn off – Battery full charged or no battery
CapsLock LEDŒ
This LED will turn on when the function of CapsLock is active.
ScrollLock LEDŒ
This LED will turn on when the function of ScrollLock is active.
NumLock LEDŒ
This LED will turn on when the function of NumLock is active.
Power Status LED
This LED will turn on whe system is powered on, and blinking
when system is Entered into standby mode.
i Π- There LEDs will be turned off during Suspend mode.
v
:
System Status Power Source Lid Status
On Off
Open Off Always On AC adapter
Close Off Off
Open Off On for 4 secs
and then Off
Battery only
Close Off Off
i
3.3.9 Hot Keys Definition
All Hot keys must be active at all times under all operation systems.
l
Hot Keys by Internal Keyboard
Hot Key Function Handler
Fn + F3 Toggle Display
(LCD/CRT/LCD&CRT)
BIOS Handler
Fn + F4 System entered into standby mode BIOS Handler
Fn + F6 System Speaker On/Off BIOS Handler
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com