User Guide

Maintenance & Disassembly
FIC A985 Service Manual 5-9
5.5.4 Removing cover plate
1. Remove cover plate, there are five screws as the picture shown
5 Screws
Figure 5-8 Release Cover Plate
5.5.5 Removing the Thermal Plate and Cooling Fan
1. Release six screws as shown in the picture below, and then remove cooling fan module by
slightly lifting it up.
6 Screws
Fan cable
Figure 5-9 Remove the Cooling Fan
5.5.6 Removing the CPU
The A985 features Intel Pentium 4 uFC-PGA Processors. It is located on the upper left side of
the system motherboard.
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com