Datasheet

L
B
A
S
B
L
Y
X
S
A
S
Y
X
B
A
L
Z
C
TF 28037
fastening lug measures
C
Z
PCT polycarbonate with transparent cover
PC polycarbonate with grey cover
AB ABS plastic
ABT ABS plastic base and polycarbonate
transparent cover
Al Aluminium
P polyester / fibreglass (GRP)
SYMBOLS AND ABBREVIATIONS
PCT 05 07 05
Height
Length
Width
Enclosure type
CIRCUIT BOARD BRACKET
ORDER SYMBOL
89 mm
Remarks
Adapter for EURONORM II,
PICCOLO, MINI. Direct mount
to EK, SOLID, EKI.
MB 28086
Standard Mounting
Distance
b)
MB 28086
a)
b)
a)
Printed circuit boards and mounting plates often need special
mounting supports that offer flexibility in positioning the
boards across the enclosure body. Mounting supports also
raise the board above the enclosure bottom, especially effective
when using two sided boards. This circuit board bracket has a
standard E1 (IEC 297-3, DIN 41494) Eurocard screw mounting
distance of 89 mm (3.5") accepting M2,5 to M4 screws. The
bracket can also be used for nonstandard boards by separating
the ends of the bracket (a) from the connector bridge (b).
If the bracket is not needed, the adapter parts for each
individual mounting pod size can be used only for raising
the board above the enclosure body level.
CIRCUIT BOARD BRACKET
Ø 0.4
Ø 0.3
Ø 0.3
a)
mm
Wall
mounting
External
height
External
width
External
depth
Free internal
mounting
height
Mounting plate
assembly
Mounting plate
assembly
Wall
mounting