Datasheet
FIBOX EURONORM
ALUMINIUM ENCLOSURES
Enclosure covers can be custom designed. Modifications
include holes, cutouts, flanges, and frames. Even external
changes such as cooling ribs (heat sinks) are possible.
OEMís receive the enclosure ready for assembly.
Cover screws are designed for automatic assembly using normal
tools or PosiDrive Phillips screwdrivers. Slightly ferrite,
FI stainless screws work with magnetised drivers.
This enclosure has more internal mounting points than other
enclosures on the market. There are threaded M4 or M6
mounting pods at both interior ends of the bases. Along the
interior sides, the enclosure bases have rows of pods ready for
M3 Taptite (smaller enclosures) and M5 Taptite (larger
enclosures). Alternatively, pods can be machined for M4 or M5
mounting screws. Helicoil inserts are available in English thread
sizes.
The large number of mounting pods, especially in the bigger
enclosures, creates many alternatives for mounting
components. Various sized mounting plates are easily installed.
DIN rails can be mounted either vertically or horizontally
permitting high density terminal block installation.
Usable internal depth is maximised as Euronorm II has the
lowest height mounting pods on the market.
A special retainer keeps cover screws captive. No more lost
hardware.
A variety of mounting plate sizes are available, plus TS35 and
TS15 DIN rail cut to size.
Proper electrical earthing is ensured with copper plated screws
and paint free grounding pods.
The enclosures can be mounted through the base. The
mounting holes are outside the gasket area; maintaining the
water tight seal. Oval shaped mounting holes accommodate
mounting centre variations.
Optional stainless steel wall mounting plates permit mounting
without opening the enclosure.
The Euronorm II features a slightly bevelled edge design creating
a modern look.
Robotically applied, foamed in place PUR gaskets are into the
unique designed gasket groove. The tight adhesion and low
compression set of PUR gasket material insures protection
ratings of NEMA 4 and IP 66/67.
Enclosure bases are tapped to receive cover screws, either M4
or M6, depending upon enclosure size. Optional special thread
types are available, as are Helicoil special steel thread inserts
which prevent cover screws from corroding even in saltwater
environments.
Customisation of the back and sides of the enclosure can be
supplied by Fibox.
Larger enclosures have lots of space for mounting instruments,
switches, sensors, indicators and connectors. Smooth sides
permit easy machining and allow decal and screen printing.
Fibox can customise the enclosure with openings, cut-outs,
holes and tapped holes. Changes can add unique options, for
example, conduit hub openings or cooling fins.
Manufactured using unique techniques. These enclosures have
straight sides (no draft angle) which means conduit and cable
fitting are at right angles, insuring stress free connections.
Further, straight sides mean that enclosures can be securely
"ganged" together without gaps.
1.
3.
4.
5.
6.
7.
9.
10.
11.
12.
13.
14.
2.
8.