Hardware Guide

FIBOCOM MC610 Series Hardware Guide 9/71

The mobile terminal equipment does not guarantee effective connection under

any circumstances, for example, when the mobile terminal equipment is

defaulted or (U) SIM is invalid.

In case of the above situations in an emergency, remember to use the

emergency call, and make sure your device is turned on and in an area of

sufficient signal strength.

Your mobile terminal equipment will receive and transmit RF signals when it is

turned on. RF interference occurs when it is close to televisions, radios,

computers or other electronic devices

Keep the mobile terminal equipment away from flammable gases. Please turn

off the mobile terminal equipment when it is near gas stations, oil depots,

chemical plants or explosive workplaces.

There are potential safety hazards in the operation of electronic devices in any

potential explosion hazard area.

1.3 References

This product is designed with reference to the following standards:

⚫ 3GPP TS 51.010-1 V10.5.0: Mobile Station (MS) conformance specification; Part 1: Conformance

specification

⚫ 3GPP TS 36.521-1 V13.6.0: User Equipment (UE) conformance specification; Radio transmission

and reception; Part 1: Conformance testing

⚫ 3GPP TS 21.111 V10.0.0: USIM and IC card requirements

⚫ 3GPP TS 51.011 V4.15.0: Specification of the Subscriber Identity Module -Mobile Equipment (SIM-

ME) interface

⚫ 3GPP TS 31.102 V10.11.0: Characteristics of the Universal Subscriber Identity Module (USIM)

application

⚫ 3GPP TS 31.11 V10.16.0: Universal Subscriber Identity Module (USIM) Application Toolkit(USAT)

⚫ 3GPP TS 36.124 V10.3.0: Electro Magnetic Compatibility (EMC) requirements for mobile terminals

and ancillary equipment