Hardware Guide
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM MC116-NA Series Hardware Guide Page 14 of 63
3.2 Pin Function
Table 3-1 I/O description parameters
Symbol Description
IO Input/Output
DI Digital input
DO Digital output
PI Power input
PO Power output
AI Analog input
AO Analog output
OD Open drain
OC Open collector
The pin function description of MC116-NA series module is shown as table 3-2:
Table 3-2 Pin description
Pin Num
Pin Name I/O Level Description
1 WAKEUP_IN I
V
IL
min=-0.3V
V
IL
max=0.6V
V
IH
min=1.2V
V
IH
max=2.0V
External device wake-up module, low
active by default, with software
programmable option.
2 AP_READY I
V
IL
min=-0.3V
V
IL
max=0.6V
V
IH
min=1.2V
V
IH
max=2.0V
Reserved
3 RESERVED - - Reserved
4 W_DISABLE# I
V
IL
min=-0.3V
V
IL
max=0.6V
V
IH
min=1.2V
V
IH
max=2.0V
Module flight mode control. Pulled up by
default. Pull down this pin, the module
enters airplane mode
5 NET_MODE O
V
OL
max=0.45V
V
OH
min=1.35V
Module network state indicate (by default)
6 NET_STATUS O
V
OL
max=0.45V
Module network state indicator