Hardware Guide

Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM MC116-NA Series Hardware Guide Page 11 of 63
AT Command 3GPP TS 27.007 and 27.005, and proprietary FIBOCOM AT
Firmware update USB (UART does not support DOWNLOAD)
Voice service
VoLTE, HR, FR, EFR, AMR, DTMF, Caller ID, Call Transfer, Call Hold, Call
Waiting and Multi-Talk, etc.
SMS
point-to-point MO, MT; cell broadcast; support Text and PDU modes
MMS service
Need AP to realize MMS protocol
When the temperature is beyond the normal operating temperature range (-30°C to +75°C), the
RF performance of the module may slightly exceeds the 3GPP specification.
2.3 Functional Diagram
Figure 2-1 shows the main hardware features of the MC116-NA module, including baseband and RF
features.
Baseband includes:
LTE_FDD controller
PMIC
MCP
UART, USB, (U)SIM, PCM, I2C, SPI, SGMII, SDIO, ADC, GPIO
RF includes:
RF Transceiver
RF PA
RF filter
Antenna
Note: