User's Guide
Table Of Contents
- T-Mobile KVD21 User Guide-simplify20210930 手冊 OK
- Safety Guidelines
- Introduction
- Getting to Know Your T-Mobile 5G Gateway
- Setting up the T-Mobile 5G Gateway
- Connecting Devices
- Accessing Your Web GUI (Graphical User Interface)
- Replacing the SIM Card
- Troubleshooting
- Understanding the LCD
- Technical Specifications
- Terms and Conditions
- Privacy Policy
- Customer Support
- Safety card_138x138mm_T-MBL(for print)_2021-1027 警語 OK
Page 9
Need help? Visit
or call T-Mobile customer service at
T-Mobile 5G Gateway User Guide
After the gateway is connected to a power source, the LCD screen displays an animated T-Mobile
logo that indicates the gateway is starting up.
Four small dots displayed on the LCD panel indicates available screens. Take a moment to browse
these screens to see what information is available. For more information about the LCD screen
display, refer to the section .
The start up sequence is complete when the LCD shows:
ż Connection
ż Devices
ż Messages
ż Language
Connect your wireless devices to your network using the Wi-Fi SSID (Wi-Fi name) and Wi-Fi Key
(Wi-Fi password), which are found on the gateway’s rear panel. Here is an example of the label:
The gateway has two (2) Ethernet LAN ports. Use an Ethernet cable to connect devices that don’t
have Wi-Fi adapters or capabilities.