User's Manual
Table Of Contents
- Copyright
- Attention
- Trademark
- Versions
- Foreword
- Product Overview
- Structure
- Hardware Introduction
- Hardware Interface
- Power Interface
- Power on/off and Reset Signal
- Status Indicating Signal
- USB /SSIC Interface
- USIM Interface
- Digital Audio
- Win8/Android Switch Control Interface
- W_DISABLE# Interface
- TX_BLANKING Interface
- WAKEUP_Host Interface
- BODY_SAR Interface
- I2C Interface
- Clock Interface
- Config Interface
- RF Interface
- Other Interfaces
- Electrical and Environmental Features
- RF Interface
L830-EA M.2 Module Hardware User Manual Page
39
of
45
Figure 5-11 0.81mm coaxial cable matching RF connector
Figure 5-12 the RF connector insert into RF connecting seat
5.15.3 Main Performance of RF Connector
Rated condition
Environmental condition
Frequency range
DC to 6GHz
Temperature range:
Characteristic
impedance
50Ω
–40°C to +85°C
5.16 Other Interfaces
L830-EA M.2 module does not support the GPIO and Tunable ANT interface yet.
6 Electrical and Environmental Features
6.1 Electrical Features
The table below lists the range of L830-EA module ’s electrical characteristics: