User's Manual
Table Of Contents
- Copyright
- Attention
- Trademark
- Versions
- Foreword
- Product Overview
- Structure
- Hardware Introduction
- Hardware Interface
- Power Interface
- Power on/off and Reset Signal
- Status Indicating Signal
- USB /SSIC Interface
- USIM Interface
- Digital Audio
- Win8/Android Switch Control Interface
- W_DISABLE# Interface
- TX_BLANKING Interface
- WAKEUP_Host Interface
- BODY_SAR Interface
- I2C Interface
- Clock Interface
- Config Interface
- RF Interface
- Other Interfaces
- Electrical and Environmental Features
- RF Interface
L830-EA M.2 Module Hardware User Manual Page
2
of
45
Copyright
Copyright ©2015 Fibocom Wireless Inc . All rights reserved.
Without the prior written permission of the copyright holder, any company or individual is prohibited to
excerpt, copy any part of or the entire document, or transmit the document in any form.
Attention
The document is subject to update from time to time owing to the product version upgrade or other
reasons. Unless otherwise specified, the document only serves as the user guide. All the statements,
information and suggestions contained in the document do not constitute any explicit or implicit
guarantee.
Trademark
The trademark is registered and owned by Fibocom Wireless Inc.
Versions
Version
Date
Remarks
V1.0.0
2015-06-05
Initial Version
V1.0.1
2015-06-16
Update the supported Cat of HSPA ;
Update the description of digital voice ;
Update the description of USB and Win8/Android switch ;
Update the consumption
V1.0.2
2015-07-07
Update part of error description
V1.0.3
2015-09-19
Delete the Band25, Update the parameters of GPS, and update the
logo