User's Manual
Table Of Contents
- Copyright
- Attention
- Trademark
- Versions
- Foreword
- Product Overview
- Structure
- Hardware Introduction
- Hardware Interface
- Power Interface
- Power on/off and Reset Signal
- Status Indicating Signal
- USB /SSIC Interface
- USIM Interface
- Digital Audio
- Win8/Android Switch Control Interface
- W_DISABLE# Interface
- TX_BLANKING Interface
- WAKEUP_Host Interface
- BODY_SAR Interface
- I2C Interface
- Clock Interface
- Config Interface
- RF Interface
- Other Interfaces
- Electrical and Environmental Features
- RF Interface
L830-EA M.2 Module Hardware User Manual Page
16
of
45
3.2 Application Interface Description
L830-EA M.2 module uses 75-pin gold fingers as the external interface, the size of the module please
refer to the section 3.1.As shown in Figure 4-2, L830-EA M.2 module uses the 75-pin fingers interface
( 67 pins are the signal interface and 8 pins are notch) .About the naming rules of M.2, L830-EA adopts
the Type 3042-S3-B (30mmx42mm,the maximum thickness of element layer of Top surface is 1.5mm , the
thickness of PCB is 0.8mm , Key ID is B ) .