User's Manual
Table Of Contents
- Copyright
- Attention
- Trademark
- Versions
- Foreword
- Product Overview
- Structure
- Hardware Introduction
- Hardware Interface
- Power Interface
- Power on/off and Reset Signal
- Status Indicating Signal
- USB /SSIC Interface
- USIM Interface
- Digital Audio
- Win8/Android Switch Control Interface
- W_DISABLE# Interface
- TX_BLANKING Interface
- WAKEUP_Host Interface
- BODY_SAR Interface
- I2C Interface
- Clock Interface
- Config Interface
- RF Interface
- Other Interfaces
- Electrical and Environmental Features
- RF Interface
L830-EA M.2 Module Hardware User Manual Page
11
of
45
Accessories
Firmware Loader Tool over USB
User Manual
Developer Kit
Note:
1. Please make sure the temperature for device will not be higher than 65˚C.
2. The minimum distance between the user and/or any bystander and the radiating structure of the
transmitter is 20cm.
3. Assessment of compliance of the product with the requirements relating to the Radio and
Telecommunication Terminal Equipment Directive (EC Directive 1999/5/EC) was performed by
PHOENIX TESTLAB (Notified Body No.0700),