User's Manual
Table Of Contents
- Preface
- Introduction
- Mechanical
- HardwareOverview
- HardwareInterface
- ElectricalandEnvironmental
- RFInterface
H380 M.2 Series Module Hardware User Manual page
12
of
41
3.2 Application Interface Description
H380 M.2 module uses 75-pin gold fingers as the external interface,the size of the module please
refer to the Section3.1.
As shown in Figure 4-2, H380 M.2 module uses the 75-pin fingers interface(67 pin is signal interface
and 8 is notch).
About the naming rules of M.2, H380 uses the Type 2242-S3-B (22mmx42mm,Top surface element
layer maximum thickness is 1.5mm, the thickness of PCB is 0.8mm, Key ID is B)