User Manual
Table Of Contents
- Confidential Material
- Copyright
- Revision History
- Trademarks Notice
- Contents
- Preface
- Introduction
- Hardware Interface Description
- Electrical and Environmental Specifications Absolute Maximum Ratings
- Mechanical Design
- Antenna Interface
G610 GPRS Module Hardware User Manual Page 34 of 47
When the G610 POWER ON , the LPG timing see as below:
3.11.4 Trace Ports
The GSM/GPRS network and G610 module is incorporated a complicated system. The G610
prepared the trace function for debugged or acquired the data of the system. The G610 transfer
these data from SPI port. It can be operated on the PC software and execute by SPI adaptor to
RS232.
Important: It’s recommend that reserved these ports and connected to a socket in any
design.
G610 Pin# G610 Signal name Description
53
PCM_DIN
TR_MISO
Trace data input
50
PCM_FS
TR_MOSI
Trace data output
52
PCM_CLK
TR_CLK
Trace clock output
51
PCM_DOUT
TR_CS
General purpose I/O
48 TR_INT Trace Interrupt Input
POWER_ON Register network IDLE mode