Product Brochure

Product Primary Uses Product Compatibilty
Hidden
Applications
Deck Surfaces
/ Ramps
Perimeter
Boards
ArmorGuard EDGE* 90-degree Installations All PE / PVC Decking
✓
✓
EDGEX* 90-degree or Angled Installations All PE / PVC Decking
✓ ✓
Phantom Universal 90-degree or Angled Installations All PE Decking
✓ ✓
Starter Clips First and Last Boards All PE / PVC Decking
✓ ✓
Pro Plug System Deck*
Stair Tread or Perimeter Boards
Promenade, Paramount, Concordia, Sanctuary
and Good Life Decking
✓ ✓ ✓
Pro Plug System Fascia*
Fascia or Riser Boards All PE Fascia and Risers
✓
Product Package Size Coverage Package Contents
ArmorGuard EDGE
90 ct. Box 50 sq. .
• #7 x 2-¼-in. 410 stainless steel screws with T-15 drive head
• NEVER-MISS
™
guide
450 ct. Pail 250 sq. .
EDGEX
90 ct. Pail 50 sq. .
450 ct. Pail 250 sq. .
900 ct. Pail 500 sq. .
Pro Plug System Deck* 224 ct. Box
100 l/f ^
• #10 x 2-¾-in. epoxy-coated carbon steel screws and T-20 drive head
• 300 color-matched plugs
• ProPlug screw setting tool with T-20 bit
Pro Plug System Fascia* 100 ct. Box 50 l/f
• #10 x 1--in. epoxy-coated carbon steel screws T-20 drive head**
• 100 color-matched plugs
Phantom Universal
90 ct. Pail 50 sq. .
• #7 x 1--in. coated carbon steel screws with T-15 drive head
900 ct. Bucket 500 sq. .
STARTER Clips 25 ct. Blister Pack 30 l/f • 1--in. 304 stainless steel screws with T-15 drive head
*Alternative package sizes and screw options available through Starborn.
**Fascia Plug Tool and PVC / Composite Tool sold separately.
^ Based on 16-in. on center framing.
^^ Based on 12-in. on center framing.
Pro Plug
®
System - Fascia
• Pre-drilling is required at 40 degrees Fahrenheit or below.
We strongly recommend pre-drilling in all instances.
• Fascia Pro Plug available for PE composite.
• Creates a smooth, clean finish on fascia and riser boards.
• Plugs are made from actual deck and trim board material, so
the color and grain match perfectly.
• Starborn Fascia Pro Plug Tool Set sold separately.
Pro Plug
®
System - Deck
• Pre-drilling is required at 40 degrees Fahrenheit or below.
We strongly recommend pre-drilling in all instances.
• Creates a smooth, clean finish on deck boards.
• Plugs are made from actual deck and trim board material,
so the color and grain match perfectly.
• Not for use on fascia or risers.
STEP 1: Set screw
with PVC Tool.
STEP 2: Tap in plug
with hammer.
59