User Manual

When you purchase a product offered by FiberHome from an authorized dealer, you
have a 12-month warranty as standard, except for man-made causes. The warranty
period begins on the date of invoice.
For your lawful rights and interes ts , please notice:
1. Please keep this card properly. No reissuance will be provided if you lose it
and it becomes invalid if altered.
2. In the event of non-man-made failure of the product, you can guarantee the
product by the warranty card and the pu
rchase invoice marked with the product
number.
Warranty does not cover the following circums tances :
1.Damage or malfunction caused by man-made reasons such as opening or
remodel the machine on users' own.
2.Damage or malfunction caused by unsatisfactory environment.
3.Damage or malfunction caused by force majeure incidents (such as fire,
earthquake, lightning strike, war).
4.Damage or malfunction caused by failure to operate and maintain in
accordance with the us
er's manual.
5.Damage of external parts such as equipment enclosure, power connector in
operation.
6.The inconsistence of the Warranty Card and the product serial number, or the
warranty card has been altered.
7.Damage or malfunction caused by transporting, loading and unloading.
We provide paid repair and maintenanc e s ervice for the products that are
beyond the warranty s c ope.
The final explanation rights of this warranty des c ription are res erved by
FiberHome.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other
antenna or transmitter. End-users and installers must be provided with
antenna installation instructions and consider removing the no-collocation
statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.