User's Manual

XGS-PON FGW User Manual
48
Setup
Q_PPS_DM_018_V1.3
4.11 Fiber Gateway Setup
Fiber Gateway is intended to be installed on a flat surface.
The following table identifies the set of materials that may be required to install the equipment,
depending on the home network scenario.
Table 12: Material required for instalation
Installation phase
Item
Mandatory
Powering
Power Adapter and Power Cord
120VAC/60Hz 12VDC (3A) + 15%

Network Provider
Connection
Optical Patchcord (SM fibre ITU-T
G.657B3) with connectors SC/APC, Figure
17, b)

Optical connector cleaning kit

Home Network
Connections
Ethernet cables CAT6 568B
(1)
RJ11 Telephone Cable
(1)
Device with Wi-Fi connectivity
(laptop/smartphone/ …)
(1)
(1) Home network scenario dependent
4.11.1 Network Provider Connection
An Optical Patchcord (SM fibre ITU-T G.657B3) with connectors SC/APC, Figure 17, b), and Optical
connector cleaning material will be required.