User's Manual

XGS-PON FGW User Manual
40
Setup
Q_PPS_DM_018_V1.3
4.2 Equipment buttons
Fiber Gateway connections Power ON/OFF and Reset buttons are located at the back side of the
equipment; WPS and INFO/WIFI
1
buttons are located at the front side of the equipment.
Figure 14: Fiber Gateway Buttons
Table 9: Fiber Gateway buttons description
Number
Name
Description
B1
WPS
Wi-Fi Protected Set-up Button;
With the Wi-Fi interface on, in order to connect a
device the interface, pressing the WPS button for
1second will start the association process.
B2
INFO/WIFI
When pressed allows visualizing the equipment
status as the status LEDs, normally off for energy
saving, will light up and show equipment current
status;
Some equipment have a WIFI button to switch
on/off equipment Wi-Fi
B3
RESET
When pressed 5 seconds, will reset the equipment
to factory configurations
1
Model dependent; Most of the models INFO is an button pressing lights status LEDs, normally off for energy
saving; in some models a WIFI button allows switching equipment Wi-Fi on/off