User's Manual

XGS-PON FGW User Manual

Technical Description

Q_PPS_DM_018_V1.3

The XGS-PON Fiber Gateway equipment has a DHCP client to get an IP address, alternatively the XGS-

PON/NG-PON2 ONT Gateway could be configured with a static IP. The configuration of the static IP or

DHCP client is related to the WAN side and is enabled by the OLT.

2.9.2.2 Logical interface (VLAN encapsulation)

If the XGS-PON Fiber Gateway has no FXS ports and the VoIP service is transparently forwarded from

the OLT up to the Home Gateway (and vice versa) within a previously defined voice VLAN. XGS-PON

Fiber Gateway respects the defined priority and implements the traffic encapsulation from its own

Ethernet interface into a specific T-CONT/XGEM-Port over the PON interface and up to the OLT

equipment.

2.10 Wi-Fi

The XGS-PON Fiber Gateway supports Wi-Fi 6, with Wi-Fi interfaces operating in the 2.4GHz and 5GHz

UNII-1 and UNII-3 frequencies

2.10.1 Compliance

• IEEE 802.11a (5GHz, 6,9,12,18,24,36,48,54 Mbps)

• IEEE 802.11b (2.4GHz, 1, 2, 5.5, 11 Mbps)

• IEEE 802.11g (2.4GHz, 6,9,12,18,24,36,48,54 Mbps)

• IEEE 802.11n (2.4GHz and 5 GHz, up to 600 Mbps)

• IEEE 802.11ac (5GHz, up to 3400 Mbps)

• IEEE 802.11ax (2.4 GHz): up to 1200 Mbps

• IEEE 802.11ax (5 GHz): up to 4800 Mbps

2.10.2 Features

The XGS-PON Fiber Gateway supports the following features:

• 802.1x Authentication;

• External RADIUS Authentication;

• WPA/WPA2 Protected access;

• 64/128 Bits WEP;

• AES and TKIP Encryption;

• Wi-Fi multimedia support: WMM and WMM-PS;

• Multiple SSIDs Profiles;

• MAC Address filtering integrated;

• WPS (Pushbutton and PIN entry);

• Hotspot 2.0;

• Band steering.

2.10.3 Interfaces

• Dual-band, concurrent mode 2.4GHz plus 5GHz (UNII-1 and UNII-3),

• Compliant with IEEE 802.11 a/b/g/n/ac/ax

• Channel Bandwidth: 20, 40, 80