Installation manual
This manual describes the first installation of the Home Center 3 smart home gateway. To see a full description of all features and how to configure them visit our website: manuals.fibaro.
Table of contents Important safety information......................... 4 Installation.................................................... 6 First configuration......................................... 8 Remote access............................................ 9 Mobile apps................................................. 9 Status indicators........................................... 10 Buttons........................................................ 11 Specifications........................................
Important safety information Read this manual carefully before installing and operating the product. ! Warning! • • • ! Caution! • • • • • • • • 4 The manufacturer will not be held responsible for any loss or damage resulting from not following the instructions. Store this manual in a secure place for future reference. This product is not a toy. Keep away from children and animals. When wall-mounted, do not place the product higher than 2 meters from the floor.
i Note • • • Do not place the product in metal boxes or on metal surfaces for best radio performance. Create system backups regularly to prevent losing your system configuration. (LAN) interface to your local network only. Make sure your Connect local network is secure and can be accessed by trusted devices only.
Installation Using Ethernet cable (recommended) 1. Connect the gateway to your home’s Internet router using the provided Ethernet cable. 2. Plug the provided power adapter into an outlet and connect it to the gateway. 3. The gateway will turn on and 6 indicator will turn copper.
Using Wi-Fi only 1. Plug the provided power adapter into an outlet and connect it to the gateway. 2. The gateway will turn on and indicator will turn copper. 3. Connect your computer to Wi-Fi network created by the gateway. You will find Wi-Fi SSID (name) and password on the bottom of the device.
First configuration 1. Go to find.fibaro.com. 2. List of all gateways in your home network will be displayed. (If you are connected to the Wi-Fi network created by the gateway, skip to step 4.) 3. Click Open next to gateway you want to configure. 4. Choose your language. 5. Login with default credentials: • • Login: admin Password: admin 6. Configure the gateway by following steps in the Configuration Interface.
Remote access To control the gateway outside your house: 1. In your Internet browser go to id.cloud.fibaro.com. 2. Create an account. 3. Go to Remote Access and add your gateway. Mobile apps To control the gateway with a mobile device, install the Home Center app.
Status indicators Power Copper – powered Internet Copper – connected to Internet Red – disconnected from Internet LAN Copper – connected to LAN Installer Copper – installer assigned Green – remote support enabled Red – installer not assigned Recovery Red – in Recovery Mode Fast pulsing green – creating backup Slow pulsing copper – update available Fast pulsing copper – connecting to LAN Smart Home Wi-Fi Copper – connected to Wi-Fi Fast pulsing copper – connecting to Wi-Fi Red – incorrect Wi-Fi password /
Buttons Power Click Hold for 5s Hold for 15s Wake up Sleep mode Restart Recovery Hold during startup Put in Recovery mode Hold for 10s Switch between Dynamic and Static IP: Hold for 20s • and blink yellow: IP set to Dynamic • and blink green: IP set to Static Reset network settings: • and blink red – settings reset 11
Specifications General information Model CPU Quad-core Arm Cortex A53 (1.2GHz) RAM RAM 2GB LPDDR3 Flash memory 8GB eMMC Power supply 12V DC (adapter included) Operating temperature 0-40°C Operating humidity max. 75% relative humidity (non-condensing) Network interface 10/100 (Base-T) Ethernet via RJ45 connector USB Power connector Dimensions 12 FGHC3-001 1 (2.0) barrel connector 5.5mm x 2.
Radio Communication Protocol Z-Wave (500 series) Wi-Fi (802.11 b/g/n/a/ac) 433Mhz 868Mhz Radio frequency band Max. transmitting power EU 868.0-868.6 MHz 869.7-870.0MHz +14dBm AU, NZ 915.0-928.0MHz +5dBm CL 902.0-928.0MHz +5dBm BR 915.0-928.0MHz -2dBm THA 920.9-923.1MHz +7dBm 2.4GHz 2400.0-2483.5MHz +20dBm 5GHz 5150.0-5250.0MHz +14dBm EU, THA 433.05-434.04Mhz +10dBm AU, NZ, CL, BR 433.05-434.04Mhz +14dBm 868.0-869.65MHz +10dBm ZigBee EU 2400.0-2483.
Warranty terms and conditions 1. FIBAR GROUP S.A. with its registered office in Wysogotowo, ul. Serdeczna 3, 62-081 Wysogotowo, entered into the Register of Entrepreneurs of the National Court Register maintained by the District Court for PoznańNowe Miasto and Wilda in Poznań, VIII Commercial Division of the National Court Register (KRS) under number: 553265, NIP 7811858097, REGON: 301595664, share capital PLN 1,182,100 paid in full, other contact information is available at: www.fibaro.
incomplete, without accessories or nameplate, • it was determined that the fault was caused by other reasons than a material or manufacturing defect of the Device • the warranty document is not valid or there is no proof of purchase, 13.
Regulatory information WEEE Directive Compliance Device labelled with this symbol should not be disposed with other household wastes. It shall be handed over to the applicable collection point for the recycling of waste electrical and electronic equipment. Declaration of conformity Hereby, Fibar Group S.A. declares that the device is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU, 2011/65/EU and 2015/863.
Notebook 17
Notebook 18
Notebook
fibaro.
