Operating Manual

19
SPECIFICATIONS
Power supply:
Battery type:
Supply type:
Power consumption
(at DC operation):
Maximum voltage at out-
put terminals (ALARM NC,
TAMP NC):
Output terminals max-
imum current carrying
capacity:
EU standards compliance:
Radio protocol:
Radio frequency:
Range:
Operating temperature:
Measured temperature
range:
Temperature measuring
accuracy:
Dimensions (Diameter x
Height):
Battery and/or power supply unit
3V, CR123A
12–24V DC, LPS or NEC class 2
0.4W
24V DC / 20V AC
25mA
EMC 2014/30/EU
RAD 2014/53/EU
RoHS 2011/65/EU
LVD 2014/35/EU
Z-Wave+
868.4 or 869.8 MHz EU;
908.4 or 916.0 MHz US;
921.4 or 919.8 MHz ANZ;
869.0 MHz RU;
up to 50m outdoors
up to 40m indoors
(depending on terrain and building
structure)
0–40°C
-20–100°C
0.5°C (within 0–40°C range)
72 x 28 mm
#10: Specications
NOTE
Radio frequency of
individual device
must be same as your
Z-Wave controller.
Check information
on the box or consult
your dealer if you are
not sure.
i
NOTE
This product is
intended to be
supplied by a certied
Power Supply Unit
marked “Class 2” or
“LPS” and rated from
12V DC to 24V DC.
i