Fibaro Z-Wave modules: • Compatible with any Z-Wave home automation system, • Fibaro electronic modules are smallest devices of the type in the World and can be installed in all standard wall switch boxes, • Each module can be installed in 3 minutes, using just a screwdriver, • Designed and made in EU, in compliance with all EU regulations, • Available in competitive prices. For additional information please contact us: Michal Rodziewicz Sales Director Fibar Group Ltd. e-mail: m.rodziewicz@fibargroup.
Home Center 2 FGHC2 Product Highlights: Extremely efficient hardware architecture = fastest device of the type in the World, • Ultra low energy consumption, • Remote access via web page or mobile phone, • Simple, user friendly interface, • Fast and simple configuration, • Geo localization – tracking Your family members, • SMS notification, • Manageable users’ rights, • Various devices’ associations, • Conditioning scenes depending on weather or other, user-defined variables, • Advanced recovery system, • Sy
Home Center Lite FGHCL Product Highlights: • Extremely efficient, optimized hardware architecture, • Ultra low energy consumption, • Remote access via web page or mobile phone, • Simple, user friendly interface, • Fast and simple configuration, • Geo localization – tracking Your family members, • Manageable users’ rights, • Various devices’ associations, • Conditioning scenes depending on weather or other, user-defined variables, • Advanced recovery system, • System backup is always saved on cloud service,
Universal Dimmer 500W FGD-211 Product Overview: Radio controlled light dimming module, designed to work with light sources of any type. May be connected to two-wire or three-wire cable. Fibaro Dimmer can switch or dim connected litght source either through radio waves or through the wall switch connected directly to it. Automatically senses connected device, features automatic overload protection switch-off and soft start function. Works as a dimmer or as a connector, with two-wire or three-wire cables.
Universal Dimmer 500W FGD-211 Technical Data: • Power source 230V +/-10%, 50Hz, • Output power 25-500W (resistive loads only)*, • Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use), • Surge protection: 2,5A, • Ambient temperature: 10oC - 40oC, • To be mounted in standard wall switch boxes Ø ≥ 50mm, • Radio protocol: Z-Wave, • Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, • Antenna range: up to ca.
Roller Shutter FGR-221 Product Overview: Radio controlled module, designed to work with electric motors in blinds, rollers, canopies and such. Fibaro Blind/Roller Shutter can steer connected device either through radio waves or through the wall switch, connected directly to it. Equipped with unique feature of monitoring current Roller/Blind position.
Roller Shutter 2 FGRM-222 Product Overview: New edition of Fibaro Roller Shutter, featuring a unique functionality of a garage gate controller and power metering function. Designed to work with any, VAC powered electric motor, equipped with either electronic or mechanic limit switches. Built-in, extremely accurate, calibrating mechanism allows for precise positioning of roller blinds or venetian blinds slats.
Roller Shutter 2 FGRM-222 Technical Data: • Power Source 110V - 230V +/-10% 50/60Hz, • Output power up to 1kW, • Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use), • Overheating protection: safety off at 105oC, • Ambient temperature: 10oC - 40oC, • To be mounted in standard wall switch boxes Ø ≥50mm, • Radio protocol: Z-Wave, • Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, • Antenna range: up to ca.
Relay Switch 1x3kW FGS-211 Product Overview: Radio controlled Fibaro On/Off Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate an electric device of 3,0kW power output. Fibaro On/Off Relay Switch can switch on or off connected device either through radio waves or through the wall switch connected directly to it.
Relay Switch 2x1,5kW FGS-221 Product Overview: Radio controlled Fibaro Double On/Off Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate two independent devices of 1,5kW combined power output.
RGBW Controller FGRGBWM-441 Product Overview: Universal, Z-Wave compatible RGB / RGBW controller. Fibaro RGBW Controller may control LED strips, RGB / RGBW LEDs and 12V - 24V powered light sources. In addition the device supports up to four, 0V - 10V analogue sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts. May be used as a dimmer with Halogen lamps.
Fibaro Wall Plug FGWPE-101 FGWPF-101 (Schuko) Product Overview: Fibaro Wall Plug, with power metering feature, is an intelligent, ultimate plug & play, most sophisticated, extremely compact, remotely controlled outlet adapter. This highly functional wall plug can be applied wherever there's a need to control electrical devices of maximum 2,5 kW power output, while monitoring power consumption in a convenient and maintenance-free way.
Fibaro Wall Plug FGWPE-101 FGWPF-101 (Schuko) Technical Data: • Power Source 110 - 230 V AC ±10% 50/60Hz, • Rated operational output voltage: 11A/230V AC 50/60Hz - continuous load, • Power consumption: up to 0,8W, • Output power for resistive loads: 2,5 kW continuous load, • In accordance with UE standards: EN 55015 (noise) EN 60669-2-1 (operational safety) • Circuit temperature limit: 105°C, • Operational temperature: 0 - 40 °C, • For use with sockets (Compatible with each EU plug: - CEE 7/16 - max load.
Motion Sensor FGMS-001 Product Overview: The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network.
Motion Sensor FGMS-001 Technical Data: • Power Supply: CR123A battery, 3.
Flood Sensor FGFS-101 Product Overview: Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact. The device has built in temperature sensor, monitoring temperature of e.g. floor.
Flood Sensor FGFS-101 Technical Data: • Power Supply: 12 - 24 VDC • Battery Type: CR123A • Power Consumption (at VDC operation): 0,4W • Output terminals maximum current carrying capacity (ALARM NC, TAMP NC): 25mA • Maximum voltage at output terminals: 40V (AC or DC) • EU standards compliance: EMC 2004/108/EC, R&TTE 199/5/WE • Radio protocol: Z-Wave • Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU; • Range: up to 50m outdoors up to 30m indoors (depending on terrain and building stru
Smoke Sensor FGSS-001 Product Overview: Fibaro Smoke Sensor is a universal, Z-Wave compatible, optical smoke detector. The device can be battery (battery life approx. 3 years) or alternatively VDC powered (12 or 24 VDC). Smoke alarm is signaled by sound, LED diode blinking and through operating commands sent to the Z-Wave network devices. Additionally, smoke alarm may be sent to an alarm system or fire alarm system hub, through a NC contact terminals opening.
Smoke Sensor FGSS-001 Technical Data: • Power Supply: 12 - 24 VDC • Battery Type: CR123A • Power Consumption (at VDC operation): 0,4W • Output terminals maximum current carrying capacity (ALARM NC, TAMP NC): 25mA • Maximum voltage at output terminals: 24V (AC or DC) • EU standards compliance: EMC 2004/108/EC, R&TTE 199/5/WE • Radio protocol: Z-Wave • Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU; • Range: up to 50m outdoors up to 30m indoors (depending on terrain and building stru
Universal Binary Sensor FGBS-001 Product Overview: The Universal Binary Sensor is a wireless module that makes it possible to improve the functionality of any sensor with a binary output by allowing it to communicate with the wireless network Z-WAVE and the FIBARO building intelligence system. Moreover, the module allows for wireless communication between the system and the DS18B20 temperature sensors. The device can service up to two binary sensors and up to four DS18B20 temperature sensors.
Universal Binary Sensor FGBS-001 Technical Data: • Supply voltage: 9-30V DC ±10% • Input: 2 potential-free inputs, 1 digital input 1-wire • Output: 2 potential-free outputs • Maximum current carrying capacity of outputs: 150mA • Maximum voltage at output contacts: 36V DC / 24V AC ±5% • Operating temperature: 0 - 40 °C • Number of servicing temperature sensors: 4 • Measurement range: -55 °C - +126 °C • Radio protocol: Z-Wave • Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, • Range:
Door / Window Sensor FGK-101 - 107 Colour options: FGK-101 FGK-102 FGK-103 FGK-104 FGK-105 FGK-106 FGK-107 Product Overview: The Fibaro Door / Window Sensor is a battery powered, Z-Wave compatible reed sensor. The Fibaro Door / Window Sensor detects the doors, windows, garage gates, roller blinds etc devices opening, through detaching its two elements. Every time two elements of the Sensor detach, the Sensor sends a signal to the Z-Wave network main controller.
Door / Window Sensor FGK-101 - 107 Technical Data: • powered by single ER14250 battery, • inputs - single, IN • number of DS sensors supported - 1 • ambient temperature - 0 - 40oC • radio frequency - 868,4 MHz EU; 908,4 MHz US; 921,4 MHz AU/NZ; 869,2 MHz RU, • operating range - up to 30 m indoors; up to 50 m outdoors, • dimensions (L x W x H): 76 x 17 x 19 mm
Bypass Fibaro FGB-001 Product Overview: Bypass Fibaro is a device complementary to Fibaro Dimmer FGD211. Its installation makes possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.
