SDS
November 2012 – Version 1.1 – Li-SOCl
2
single cells and multi-cell battery systems Page 3
STORAGE: Store in a cool, regulated (preferably below 21°C and in any case below 30°C), dry and ventilated area, away
from possible sources of heat, open flames, food and drink. Avoid exposure to direct sunlight for long periods.
Temperatures above 100°C (or higher for High Temperatures cells and batteries such as the LSH20-150 cell- refer to
individual data sheets for maximum temperatures) may cause leakage and rupture, and result in shortened battery service
life. Keep proper clearance space between batteries and walls. Since short circuit can cause burn hazard, leakage or
explosion hazard, keep batteries in original packaging until use and do not mix them.
HANDLING:
Do not open the battery system.
Do not crush or pierce the cells.
Do not short (+) or (-) terminal with conductors.
Do not reverse the polarity.
Do not submit to excessive mechanical stress.
Do not mix batteries of different types or mix new and old ones together.
Do not use the unit without its electronic management system.
Do not expose the unit to water or condensation.
Do not directly heat, solder or throw into fire. Such unsuitable use can cause leakage or spout vaporized
electrolyte fumes and may cause fire or explosion.
5. PHYSICAL AND CHEMICAL PROPERTIES
The lithium-thionyl chloride cell or battery described by this Battery Information Sheet is a sealed unit when offered for
sale. It is a manufactured “article” and does not expose the user to hazardous chemicals when used in accordance with
manufacturer specifications.
Appearance – Cylindrical shape
Odour – If leaking, gives off a pungent corrosive odour
Flash point – Not applicable Flammability – Not applicable
Boiling Point – Not applicable Melting Point – Not applicable
Vapor Pressure – Not applicable Vapor Density – Not applicable
pH – Not applicable Specific Gravity – Not applicable
Solubility (in water) – Not applicable Solubility (other) – Not applicable
6. STABILITY AND REACTIVITY
The battery system is stable when handled and stored according to section 4.
MATERIALS TO AVOID: Oxidizing agents, bases, water. Avoid electrolyte contact with aluminium of zinc.
CONDITIONS TO AVOID: Do not heat above 100°C (or higher (150°C) for High Temperatures cells and batteries such as the
LSH20-150 cell- refer to individual data sheets for maximum temperatures) or incinerate. Do not disassemble, crush,
pierce, short, charge or recharge. Avoid mechanical or electrical abuse.
HAZARDOUS DECOMPOSITION PRODUCTS: Hydrogen (H
2
) as well as lithium oxide (Li
2
O) and lithium hydroxide (LiOH) dust
are produced in case of reaction of lithium metal with water (hydrolysis).
Chlorine (Cl
2
), sulfur dioxide (SO
2
) and disulfur dioxide (S
2
Cl
2
) are produced in case of thermal decomposition of thionyl
dichloride above 100°C. Hydrochloric acid (HCl) and sulfur dioxide (SO
2
) are produced in case of reaction of thionyl
dichloride with water at room temperature.