User's Guide
24
SPECIFICATIONS
Power supply:
Rated load current:
Operational temperature:
For installation in boxes:
Overcurrent protection:
Radio protocol:
Radio signal power:
Radio frequency:
Range:
Comply with EU directives:
Dimensions (L x W x H):
100-240V~ 50/60 Hz
Single Switch 2 (FGS-213):
IEC standards: 8A
UL standards: 6.5A
Double Switch 2 (FGS-223):
IEC standards: 6.5A per channel,
10A overall
UL standards: 6A per channel,
9.5A overall
0-35°C
Ø ≥ 50mm, depth ≥ 60mm
required external 10A circuit breaker
Z-Wave (500 series chip)
up to 1mW
868.4 or 869.8 MHz EU;
908.4, 908.42 or 916.0 MHz US;
921.4 or 919.8 MHz ANZ;
869.0 MHz RU;
up to 50m outdoors
up to 40m indoors
(depending on terrain and building
structure)
EMC 2014/30/EU
RED 2014/53/EU
RoHS 2011/65/EU
LVD 2014/35/EU
42.5 x 38.25 x 20.3 mm
#11: Specications
NOTE
Radio frequency of
individual device
must be same as your
Z-Wave controller.
Check information
on the box or consult
your dealer if you are
not sure.
i
NOTE
IEC certication ap-
plies in EU countries
and most countries
using 220-240V~. UL
certication applies
in United States and
most countries using
100-120V~.
i