User's Manual
5
SUPPORTED LOADS
#2: Supported loads
The Switch 2 may operate under the following loads:
• Conventional incandescent light sources,
• Halogen light sources,
• Electrical appliances which power consumption does not exceed
the limit for a specied device.
Applied load and the Switch 2 itself may be damaged if
the applied load is inconsistent with the technical speci-
cations!
When connecting the Switch 2 act in accordance with the following
rules:
• Do not connect loads greater than those recommended!
• Do not connect types of load other than resistive!
!
Device Load IEC standards UL standards
Single Switch 2
(FGS-213)
8A 6.5A
Double Switch 2
(FGS-223)
6.5A per channel
10A overall
6A per channel
9.5A overall
Rated load current table:
NOTE
IEC certication ap-
plies in EU countries
and most countries
using 220-240V~. UL
certication applies
in United States and
most countries using
100-120V~.
i