User's Manual

ADVANCED PARAMETERS

12. First channel - time parameter for delay/auto ON/OFF modes

This parameter allows to set time parameter used in timed modes.

Available settings: 0 (0.1s), 1-32000 (1-32000s, 1s step) - time

parameter

Default setting: 50 (50s) Parameter size: 2 [bytes]

13. First channel - pulse time for ashing mode

This parameter allows to set time of switching to opposite state in

ashing mode.

Available settings: 1-32000 (0.1-3200.0s, 0.1s step) - time param-

eter

Default setting: 5 (0.5s) Parameter size: 2 [bytes]

15. Second channel - operating mode (FGS-223 only)

This parameter allows to choose operating for the 1st channel con-

trolled by the S2 switch.

Available settings: 0 - standard operation

1 - delay ON

2 - delay OFF

3 - auto ON

4 - auto OFF

5 - ashing mode

Default setting: 0 Parameter size: 1 [byte]

16. Second channel - reaction to switch for delay/auto ON/OFF

modes (FGS-223 only)

This parameter determines how the device in timed mode reacts to

pushing the switch connected to the S2 terminal.

Available settings: 0 - cancel mode and set target state

1 - no reaction to switch - mode runs until it ends