User Manual

8
LOCK MODE
#6: Lock Mode
KeyFob can be protected with a sequence of 2 to 5 button clicks.
When unlocking sequence is set, the device will lock itself after:
• being inactive for time set in parameter 2 (60 seconds by default),
• pressing and holding selected button (if set in parameter 2).
Setting the unlocking sequence and locking time-out using
Home Center conguration interface:
1. Go to the device options by clicking the icon:
2. Select the „Advanced” tab.
3. Click the “Congure” button in "Lock Mode" section.
4. Select sequence of 2 to 5 buttons, click "Next".
5. Select time to lock and locking button, click "Next".
6. Press
and simultaneously to wake up the device.
7. Wait for the device to congure.
To enable Lock Mode:
• set sequence in parameter 1,
• set time or locking button in parameter 2 (60 seconds by default),
• set PROTECTION CC to Local Protection by Sequence (done auto-
matically by Home Center controller).
Lock Mode will be disabled when:
• parameter 1 and/or parameter 2 is set to 0,
• PPROTECTION CC is set to Unprotected.
When device is locked:
• pushing buttons will not activate any actions,
• menu is available, but without option of resetting the device.