User Manual

7
VISUAL INDICATIONS
#5: Visual indications
Visual indications:
The KeyFob is equipped with a LED diode, signalling pushing the but-
tons, sequences, menu position and status of the device.
What you see What it means What to do
Learning mode
Red blink Device not added
Press any button three
times to start adding
Fast white puls-
ing
Device in adding
mode
Wait for adding process
to end
Green blink Device added –
Lock Mode
Red blink Device locked Unlock using sequence
3 red pulses Wrong sequence Try unlocking again
Red to green
transition
Device unlocked
Press buttons to activate
scenes/associations
Green to red
transition
Device locked
using button hold
–
Battery
3 magenta pulses Low battery Replace the battery
Conguration
2 white pulses Device woken up –
Device status indications:
What you see What it means
Green blink
Receiving command conrmed by the con-
troller and associated devices
Yellow blink
every 1s
Sending commands in progress
Red blink
Receiving at least one command was not con-
rmed by the controller or associated devices
Indications for scenes and associations:
After pressing one of the buttons or using sequence, KeyFob indi-
cates status of action with the LED diode.
What you see What it means
Blue pulse Entering sequence
3 blue pulses Sequence valid
3 red pulses Sequence not valid
Indications for sequences: