User Manual
4
BASIC ACTIVATION
#2: Basic activation
1. Using a coin, open the battery cover
by turning it counter-clockwise.
o
s
e
o
s
e
2. Remove the paper strip underneath
the battery.
3. Using a coin, close the battery cover
by turning it clockwise.
4. Locate the device nearby the main Z-Wave controller.
5. Set the main Z-Wave controller in (security/non-security)
add mode (see the controller’s manual).
6. Press any button three times.
7. LED will pulse white during the adding process.
8. Wait for the device to be added into the system.
9. Successful adding will be conrmed by the Z-Wave
controller’s message and green LED colour.