User Manual

18
ADVANCED PARAMETERS
19. Paired buttons association for and
This parameter allows to activate paired buttons association mode
for
and buttons. Paired buttons are dependent and association
are sent only to
groups. turns devices on and increases value,
turns them o and decreases value.
Available settings: 0 - paired buttons association inactive
1 - paired buttons association active
Default setting: 0 (inactive) Parameter size: 1 [byte]
21. Scene activation for
button
22. Scene activation for
button
23. Scene activation for
button
24. Scene activation for
button
25. Scene activation for
button
26. Scene activation for
button
This parameter determines which actions result in sending assigned
scene IDs and attributes to the controller.
Available settings: 1 - Key Pressed 1 time
2 - Key Pressed 2 times
4 - Key Pressed 3 times
8 - Key Held Down & Released
Default setting: 9 (1x & hold) Parameter size: 1 [byte]
29. Associations in Z-Wave network security mode
Parameter defines how commands are sent in specified association
groups: as secure or non-secure. Parameter is active only in Z-Wave
network security mode. It does not apply to 1st “Lifeline” association
group.
Available settings: 1 - 2nd group sent as secure
2 - 3rd group sent as secure
4 - 4th group sent as secure
8 - 5th group sent as secure
16 - 6th group sent as secure
32 - 7th group sent as secure
64 - 8th group sent as secure
128 - 9th group sent as secure
256 - 10th group sent as secure
512 - 11th group sent as secure
1024 - 12th group sent as secure
2048 - 13th group sent as secure
Default setting: 4095 Parameter size: 2 [bytes]
NOTE
Parameter 29 values
may be combined,
e.g. 1+2=3 means that
2nd & 3rd group are
sent as secure.
i
NOTE
Parameters 21 to 26
values may be com-
bined, e.g. 1+2=3
means that pressing
button once or twice
will result in sending
assigned scene ID.
i