User Manual

16
ADVANCED PARAMETERS
4. Second scene sequence
This parameter allows to set up sequence that activates scene
with ID 8. See "Sequences" on page 10 for more information.
Available settings: 0 - 1st sequence disabled
9-28086 - value of sequence
Default setting: 0 Parameter size: 2 [bytes]
5. Third scene sequence
This parameter allows to set up sequence that activates scene
with ID 9. See "Sequences" on page 10 for more information.
Available settings: 0 - 3rd sequence disabled
9-28086 - value of sequence
Default setting: 0 Parameter size: 2 [bytes]
6. Fourth scene sequence
This parameter allows to set up sequence that activates scene
with ID 10. See "Sequences" on page 10 for more information.
Available settings: 0 - 4th sequence disabled
9-28086 - value of sequence
Default setting: 0 Parameter size: 2 [bytes]
7. Fifth scene sequence
This parameter allows to set up sequence that activates scene
with ID 11. See "Sequences" on page 10 for more information.
Available settings: 0 - 5th sequence disabled
9-28086 - value of sequence
Default setting: 0 Parameter size: 2 [bytes]
8. Sixth scene sequence
This parameter allows to set up sequence that activates scene
with ID 12. See "Sequences" on page 10 for more information.
Available settings: 0 - 6th sequence disabled
9-28086 - value of sequence
Default setting: 0 Parameter size: 2 [bytes]
9. Sequences - timeout
This parameter allows to set time that must elapse from the last press
of the button to check if the sequence is valid.
Available settings: 5-30 (0.5-3s, 0.1s step) - time to lock
Default setting: 10 (1s) Parameter size: 1 [byte]