User Manual

14
BATTERY
To add an association (using the Home Center controller):
1. Go to the device options by clicking the icon:
2. Select the „Advanced” tab.
3. Click the “Setting Association” button.
4. Specify to which group and what devices are to be associated.
5. Save the changes.
6. Press
and simultaneously to wake up the device.
Paired buttons association
After pairing buttons, horizontal pairs of buttons ( and , and ,
and ) work as one button and send associations to left buttons
groups only.
Left buttons (
, , ) turn on associated devices and right buttons
(
, , ) turn them o.
In multilevel association groups (3, 7, 11) left buttons increase level
while holding and right buttons decrease it.
To pair buttons:
1. Change settings of parameters:
•
and – set parameter 6 to value 1
•
and – set parameter 7 to value 1
•
and – set parameter 8 to value 1
2. Press
and simultaneously to wake up the device.
The KeyFob in 2nd to 13th group allows to control 5 reg-
ular or multichannel devices per an association group.
“LifeLine” group is reserved solely for the controller and hence only 1
node can be assigned.
It is not recommended to associate more than 10 devices in general,
as the response time to control commands depends on the number of
associated devices. In extreme cases, system response may be delayed.