User's Manual

19
SPECIFICATIONS
Power supply:
Battery type:
Inputs:
EU directives compliance:
Radio protocol:
Radio frequency:
Range:
Operating temperature:
Supported temperature
sensor:
Dimensions (L x W x H):
3.6V DC battery
ER14250 ½ AA
single, potential-free (IN)
EMC 2014/30/EU
RED 2014/53/EU
RoHS 2011/65/EU
LVD 2014/35/EU
Z-Wave (500 series chip)
868.4 or 869.8 MHz EU;
908.4, 908.42 or 916.0 MHz US;
921.4 or 919.8 MHz ANZ;
869.0 MHz RU;
up to 50m outdoors
up to 40m indoors
(depending on terrain and building
structure)
0-40°C
single, DS18B20
76 x 17 x 19 mm
#10: Specications
TMP
- button used for including/excluding the device
and tamper detection
TP
(TEMP_POWER) - power supply terminal of
temperature sensor
TD
(TEMP_DATA) - signal terminal of temperature
sensor
GND
(GROUND) - ground terminal
IN
- potential-free input
TP (VDQ)
TD (DQ)
GND
IN
TMP
(TOP VIEW)
MAGNETIC
SENSOR
+
-
NOTE
Radio frequency of
individual device
must be same as your
Z-Wave controller.
Check information
on the box or consult
your dealer if you are
not sure.
i