User's Manual

10
OPERATING THE DEVICE
#7: Operating the device
Controlling the Door/Window Sensor with FIBARO Home Center
controller:
After adding the Sensor to the FIBARO System, it will be represented
by one or two icons in Home Center interface.
Sensor without connected DS18B20 sensor or used with a button
connected to IN input (without magnet), will be represented by a sin-
gle icon.
In case of connecting DS18B20 temperature sensor, the additional
temperature sensor icon will be displayed.
Tamper (TMP) button:
The Door/Window Sensor is equipped with a tamper switch with two
buttons.
First TMP button is located inside the device, pressed by the closed
cover. Second TMP button is located at bottom of the device, pressed
by the surface on which the device is mounted.
For the tamper switch to work one of the buttons must always be
pressed!
When one of the buttons is released, the tamper alarm will be send to
the controller and associated devices.
Additionally, tamper button allows to control the device directly.
TMP
(TOP VIEW)
(BOTTOM VIEW)
TMP
+
-