User's Manual
4
DESCRIPTION AND FEATURES
Main features of FIBARO Dimmer 2:
• Compatible with any Z-Wave or Z-Wave+ Controller
• Controlled by FIBARO Home Center or any other Z-Wave controller
• Advanced microprocessor control
• Implemented algorithm of smart light source detection
• Auto-adjustment of the appropriate control mode to connected
load
• Active power and energy metering functionality
• Soft start function
• Memory of the last lighting level settings
• Works with various types of switches – momentary, toggle,
three-way, etc.
• Active element: semiconductor electronic switch
• To be installed in wall switch boxes of dimensions allowing for
installation, conforming to provisions of applicable regulations
• FGD-212 is an extension unit
Remotely controlled light dimming module is designed to work with
various types of light sources. It may be connected to two-wire or
three-wire conguration so it can operate with or without neutral
lead. FIBARO Dimmer 2 can switch or dim connected light source
either through radio waves or through the wall switch connected
directly to it.
New FIBARO Dimmer 2 is equipped with an algorithm of smart light
source detection which makes conguration easier and ensures high
compatibility of the device. It may be used as a switch with non-
dimmable light sources (in 3-wire connection).
#1: Description and features
FIBARO Dimmer 2 is a fully
compatible Z-Wave PLUS device.
NOTE
This device may be
used with all devices
certied with Z-Wave
certicate and should
be compatible with
such devices pro-
duced by other manu-
facturers.
i