User's Manual

22
ADVANCED PARAMETERS
#13: Advanced parameters
Dimmer 2 allows to customize its operation to user’s needs. The set-
tings are available in the FIBARO interface as simple options that may
be chosen by selecting the appropriate box.
In order to congure FIBARO Dimmer 2 (using the Home Center con-
troller):
1. Go to the device options by clicking the icon:
2. Select the „Advanced” tab
GROUP 0 - The Dimmer 2 behavior - Basic functionalities
1. Minimum brightness level (parameter is set automatically during
the calibration process)
The parameter can be changed manually after the calibration.
Available settings: 1-98 - percentage level of brightness
Default setting: 1 Parameter size: 1 [byte]
2. Maximum brightness level (parameter is set automatically during
the calibration process)
The parameter can be changed manually after the calibration.
Available settings: 2-99 - percentage level of brightness
Default setting: 99 Parameter size: 1 [byte]
3. Incandescence level of dimmable compact uorescent lamps
Virtual value set as a percentage level between parameters MIN (1%)
and MAX. (99%). The Dimmer 2 will set to this value after rst switch
on. It is required for warming up and switching dimmable compact
uorescent lamps and certain types of light sources.
Available settings: 1-99 - percentage level of brightness
Default setting: 1 Parameter size: 1 [byte]
4. Incandescence time of dimmable compact uorescent lamps
This parameter determines the time required for switching compact
uorescent lamps and certain types of light sources. Setting this pa-
rameter to 0 will disable the incandescence functionality.
Available settings: 0-255 (0-25.5s)
Default setting: 0 Parameter size: 2 [bytes]
*
*
real scale
scale available
to the user
(virtual)
incandes-
cence level
of dimmable
compact uo-
rescent lamps
min
max
0% 1%
99%99%
CAUTION
The maximum
brightness level (pa-
rameter 2) must be
greater than the min-
imum brightness level
(parameter 1).
!