User's Manual

Table Of Contents

CONFIGURABLE PARAMETERS

#7: Congurable parameters

1. Motion detection – sensor sensitivity

This parameter allows to set sensitivity of PIR sensor used for motion

detection.

The higher the value of this parameter, the higher the sensitivity.

Available settings: 1 – low sensitivity

2 – medium sensitivity

3 – high sensitivity

Default setting: 2 (medium sensitivity)

2. Tamper – sensor sensitivity

This parameter allows to set sensitivity of tamper detection.

The higher the value of this parameter, the higher the sensitivity.

Available settings: 0 – tamper disabled

1 – low sensitivity

2 – medium sensitivity

3 – high sensitivity

Default setting: 2 (medium sensitivity)

3. Motion detection – LED indication

This parameter allows to choose how the LED indicator will behave

after detecting motion.

Available settings: 0 – LED indications disabled

1 – color dependent on temperature*

2 – ashlight mode**

3 – white, 4 – red, 5 – green, 6 – blue, 7 – yellow,

8 – cyan, 9 – magenta

Default setting: 1 (color dependent on temperature)

4. Tamper – LED indication

This parameter allows to choose if accessory will indicate tampering

using LED (alternate blinking in red, blue and white).

Available settings: 0 – tamper indication disabled

1 – tamper indication enabled

Default setting: 1 (tamper indication enabled)

NOTE

* Color is a smooth

transition from blue

through green to

red in range 18-30°C

(64.4-86°F).

** In ashlight mode

the LED provides

white light with high-

er brightness.