User's Manual

8
FUNCTIONALITIES
#6: Functionalities
Motion detection:
The Motion Sensor detects movement using PIR sensor and reports it
to your iOS device.
Blink of LED indicates detected motion. Color of blink is dependent on
current ambient temperature (smooth transition through blue, green
and red). Brightness of blink is adjusted by measured light intensity.
Tamper detection:
The Motion Sensor detects tampering when accessory is moved and
reports it to your iOS device. Tampering is indicated with an alternate
blinking in red, blue and white.
Temperature measuring:
The Motion Sensor measures ambient temperature every 5 min-
utes. If the measured temperature diers from previously reported
by at least 2°C (3.6°F), accessory reports it to your iOS device.
Battery level measuring:
The Motion Sensor measures battery level every 24 hours and reports
it to your iOS device. Additionally, if battery level is below 15%, the
accessory will report low level battery status to your iOS device.
Light intensity measuring:
The Motion Sensor measures light intensity. If the measured light in-
tensity diers from previously reported by at least 200 lux, accessory
reports it to your iOS device.
NOTE
If you are using Fibaro
app you can adjust
sensitivity, sustain
time and LED indica-
tion for motion detec-
tion using parameters.
i
NOTE
If you are using Fibaro
app you can adjust
sensitivity and indica-
tions for tamper de-
tection using param-
eters.
i
NOTE
The accessory mea-
sures light intensity
in the place of instal-
lation, not where the
sensor is pointed.
i
NOTE
The accessory mea-
sures temperature in
the place of installa-
tion. Remember that
temperature near
the ceiling may dier
from that on eye-level
or the oor.
i