User's Manual

7
RESET
Resetting the Flood Sensor to factory defaults:
Reset procedure allows to restore the accessory back to its factory
settings including HomeKit pairing. We recommend performing re-
setting procedure within range of your iOS device’s Bluetooth®.
1. Open the cover.
2. Press the button 3 times then press and hold the button.
3. Wait for the LED indicator to glow yellow.
4. Release the button.
5. Click the button to conrm.
6. After resetting the accessory will glow red - it is ready to be paired
again.
NOTE
If reset procedure
was performed out-
side iOS device’s
Bluetooth
® range the
accessory will not be
removed from the
HomeKit app and will
not respond. In this
case remove the de-
vice manually from
the app.
i
#5: Reset
Button