Product Brochure

Saint-Gobain ADFORS
America, Inc.
1795 Baseline Road
Grand Island, NY 14072 - USA
Phone: [phone]
Fax: [phone]
www.adfors.com
Why should you
make the switch to
FibaLath?
• Lightweight and pliable, easier
and safer to cut, lift and carry
than metal lath
• Self-furring, three dimensional
profile is attached same way as
metal lath
• Meets International Building
Code® (IBC) and International
Residential Code® (IRC)
requirements (Intertek Code
Compliance Research Report
CCRR-0249)
Introducing FibaLath™, the lightweight
alternative to metal lath
ADFORS FibaLath is an innovative fiberglass lath designed for use in stucco
applications and exterior or interior walls of manufactured stone and brick
façades. The three dimensional profile of FibaLath is self-furring and is
attached the same way as metal lath.
Additional Features & Benefits include:
• Alkali-resistant for long term performance. Will not rust or rot.
• Non-directional which means it can be applied vertically or horizontally
• Over 6 times lighter weight than metal lath (per unit area)
1919 4/18
FibaLath is a trademark of Saint-Gobain ADFORS
America, Inc.
U.S. Patent 7,625,827 and 7,902,092.
PART #
ROLL SIZE
WIDTH X LENGTH
ROLL
AREA
(FT
2
)
ROLL UPC CASE UPC
CASE
COUNT
FLX7207-A 39 in x 25 ft 81 038662946176 10038662946173 6
FLX7206-A 39 in x 55 ft 180 038662946169 10038662946166 4
FLX7205-A 39 in x 150 ft 491 038662946152 N/A 1
METAL SHEET FIBALATH
WEIGHT
SAVINGS
SQUARE
YARDS
# SHEETS
WEIGHT
(2.5#)
ROLL SIZE WEIGHT
54.7 27 136.27 lb 150 ft 30 lb 78%
20 10 50 lb 55 ft 11 lb 78%
9 4 22.75 lb 25 ft 5 lb 80%
Attaches like metal lath and meets
IBC and IRC building code requirements
Follow us on: