Technical Specifications
FEATURES
NOTES
Sh
CR/PL© 05/08 Printed in U.S.A.
* Not furnished by Fiat
®
Products. Description for specification purposes only.
OPTIONS
FIAT PRODUCTS
A CRANE PLUMBING COMPANY
• Other available color options are--white marble chips in
white cement; green marble chips in white cement; tan
marble chips in white cement.
G
IBRALTAR
®
RM/RMM
RMC/RMD
Shower Floors
• Gibraltar
®
RM / RMM / RMC / RMD
The Gibraltar
®
models RM and RMM are 36" x
36"; model RMD is 72" x 36"; and model RMC is
36" x 36". The shower are of the
Gibraltar
®
precast terrazzo type as manufactured
by Fiat Products. Shoulder shall not be less than
four inches high inside, and not less than three
inches wide.
Drain body is of stainless
steel,
cast integral, and shall provide for a
caulked lead
connection not less than one-inch
deep to
a two-inch pipe. Removable type
strainer plate.
The terrazzo is made of marble
chips cast in
white
portland cement to produce a
compressive
strength of not less than 3000
P.S.I. seven days
after casting. Terrazzo surface
is ground and
polished with all air holes and/or
pits to be
grouted and excess removed.
Floors must be
set in a bed of mortar and
leveled to avoid
stresses that may be caused by
uneven r.
•
Optional inte
• Optional rabbets are available as required at no extra charge.
quantity and location. Inside shoulder of rabbet shall be
lower than the outside shoulder, with the exception of the
common shoulder of the RMD Dual Gibraltor which will have
a rabbet with shoulders of equal height.
gral, galvanized bonderized steel, one-inch tiling
as required at no extra charge. They are
supplied only if with the order along with quantity and
and location.
.Stainless steel are available at an
additional cost.
• Standard color is black and white marble chips in white
cement.
Shown with optional tiling flange.
®