Installation Instructions

2
1
12
www.fhiaba.com · www.thevettagroup.com
Series: StandPlus/X-Pro
Operate as follows:
Unwind the electric cable and connect it directly to the wall socket.
Make sure the appliance is in the Stand-by condition and that all ights
are off; should it be not so press the Unit button to switch it off.
Connect the water line to the threaded connection at the base of the
unit, as in À gure
1
.
Fit the other end of the hose to the water tap, use the gaskets provided
in the Owner’s Kit
2
.
Firmly tighten with À ngers - a tool / wrench should not be needed to
make a proper seal. Turn on the water and ensure all connections are
not leaking prior to pushing the unit into the niche.
Front of appliance
Back of appliance
Water connectionElectrical connection