Instruction Manual
3
- Never turn on the amplifeir without installed tubes and without hooked-up spekers.
- Never place the Fezz Audio Titania power amplier near heat sources, such as radiators, heaters or direct sunlight. Ensure
adequate ventilation and airow
- We also warn against exposure of the amplier to conditions such as very low temperatures and/or high humidity.
- During normal operation, the vacuum tubes radiate signicant amounts of heat - there is a risk of burns.
- The amplier should be plugged directly into a wall socket. If you must use an extension cord, please make sure that it
has load parameters sucient to ensure proper handling of current delivery to the device.
- When cleaning, always disconnect the Titania amplier from the power source. Use a dry, soft cloth. Do not use water or
cleaning agents.
- If your amplier starts to misbehave or to work incorrectly, if it’s temperature gets too high or you start feeling smoke -
immediately disconnect the device from the mains.
- Due to the risk of exposure to high voltages – please do not open the lid of the amplier.
ATTENTION: This warning remains in force also in a situation where the device is already disconnected from the wall outlet.
- Always replace fuses in accordance with the original, intended specication.
- Do not make repairs on your own, or adjustments beyond those as described in this manual. Execution of any
unauthorized repairs or modications of the device result in a loss of warranty.
Nowadays HiFi audio world becomes increasingly digital, Fezz does not forget about analog lovers.
New version of Titania powem amplier is based on the Titania tube amplier. In standard equipped with anti-vibration feet,
adapted to the weight of the device. Backlight logo. Easily accessible fuses protecting the the deivce in case of a power tube
failure. Power amp combines all its advantages. Openness, full bodied sound, yet with a remarkably neutral tone. Two modes:
stereo and mono makes it very powerfull and versatile.
Please kindly check if the packaging of the amplier has not been damaged during transit. If you nd any damages, please
immediately contact your dealer. Remove the amplier and accessories from the packaging. Make sure that the content is not
damaged.
UNPACKING
The package should contain:
• Fezz Titania PA vacuum tube amplier
• vacuum tube of type KT88 - 4 pcs.
• vacuum tube of type 12AX7 - 2 pcs.
• power cord
• user’s manual
• cotton gloves
• optional: vacuum tube protective cage
PACKAGE CONTENT