User Manual
3
- Never turn on the amplifeir without installed tubes and without hooked-up spekers.
- Never place the Fezz Audio Mira Ceti MONO power amplier near heat sources, such as radiators, heaters or direct
sunlight. Ensure adequate ventilation and airow
- We also warn against exposure of the amplier to conditions such as very low temperatures and/or high humidity.
- During normal operation, the vacuum tubes radiate signicant amounts of heat - there is a risk of burns.
- The amplier should be plugged directly into a wall socket. If you must use an extension cord, please make sure that it
has load parameters sucient to ensure proper handling of current delivery to the device.
- When cleaning, always disconnect the Titania amplier from the power source. Use a dry, soft cloth. Do not use water or
cleaning agents.
- If your amplier starts to misbehave or to work incorrectly, if it’s temperature gets too high or you start feeling smoke -
immediately disconnect the device from the mains.
- Due to the risk of exposure to high voltages – please do not open the lid of the amplier.
ATTENTION: This warning remains in force also in a situation where the device is already disconnected from the wall outlet.
- Always replace fuses in accordance with the original, intended specication.
- Do not make repairs on your own, or adjustments beyond those as described in this manual. Execution of any
unauthorized repairs or modications of the device result in a loss of warranty.
New Mira Ceti 300b mono power amplier A-class is based on legendary direct heated triode 300b vacuum tubes. In standard
equipped with anti-vibration feet, adapted to the weight of the device. Backlight logo. Easily accessible fuses protecting the
amplier in case of a power tube failure. Thanks to PSE Parallel Single Ended circuit archtecture and specialy designed output
transformer it provides 15W and low THD distortions. Match with dedicated Sagita line pre-amplier guarantee outstanding
sound performace for a reasonable price.
Please kindly check if the packaging of the amplier has not been damaged during transit. If you nd any damages, please
immediately contact your dealer. Remove the amplier and accessories from the packaging. Make sure that the content is not
damaged.
UNPACKING
The package should contain:
• Fezz Mira Ceti vacuum tube power amplier
• vacuum tube of type 300B - 2 pcs.
• vacuum tube of type 6SN7 - 2 pcs.
• power cord
• user’s manual
• cotton gloves
• optional: vacuum tube protective cage
PACKAGE CONTENT