User Manual

Place the amplier on a stable surface. Carefully remove the vacuum tubes from their packaging and install them in the

appropriate sockets, as show below, and adhering to the numbering scheme as identied on the packaging.

Due to the presence of high temperatures during normal operation of the vacuum tubes, the location that you pick to place

your amplier should ensure ample ventilation, a free ow of air. Please maintain at least 10 cm clearance between the

housing of the amplier, together with the vacuum tubes, and other devices or elements of the interior.

The sound quality may be degraded as a result of vibrations. Therefore we recommended to place the amplier on a at and

stable surface.











DESCRIPTION OF THE AMPLIFIER

VACUUM TUBES INSTALLATION

WHERE TO PLACE YOUR AMPLIFIER

1 Volume control potentiometer

2 Tubes sockets for a left channel

3 Tubes sockets for a right channel

4 Source selector

5 Output transformer housing

6 Output transformer housing

 







