User Guide

7
If the Data lights don’t come on when your Power Line Adapters are turned on, you may
need to pair or reset the adapters, after a power cycle.
Pairing the adapters
You’ll find the Security Reset button on the base of each adapter, next to the
Ethernet port.
Make sure both adapters are plugged in and turned on. On one adapter, press and
hold the Security Reset button for 3 seconds.
On the other adapter, press and hold the Security Reset button for 3 seconds.
Don’t worry about the distance between the two adapters as you have 2 minutes
to press both Security Reset buttons.
Wait while the adapters find each other. If they have paired successfully, the Data
light on each adapter will light up.
1
2
3
4
Note
Holding the button for more than 10
seconds resets the adapter to factory
default settings.