User guide

TI 15
13
GB
1.3 Emission levels
Levels determined in accordance with EN 60745 are
typically:
Vibration emission value a
h
(vector sum for three
directions) and uncertainty K measured in accor-
dance with EN 60745:
The specified emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
2Symbols
3Technical data
* electronically limited
Screwing with impact
Sound pressure level L
PA
= 93 dB(A)
Noise level L
WA
= 104 dB(A)
Uncertainty K = 3 dB
Screwing and drilling without impact
Sound pressure level L
PA
= 68 dB(A)
Noise level L
WA
= 79 dB(A)
Uncertainty K = 3 dB
CAUTION
When working with noise
Damage to hearing
 Always use ear protection.
Drilling in metal a
h
< 2,5 m/s
2
K = 1,5 m/s
2
Screwing a
h
= 3,0 m/s
2
K = 1,5 m/s
2
Tightening screws and nuts
with maximum size
a
h
= 11,3 m/s
2
K = 3,0 m/s
2
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear protective gloves.
Wear protective goggles.
Do not throw in the household waste.
Operating mode Impact screw driver
Operating mode Screwing/Drilling without
impact
Cordless impact screw driver TI15
Motor voltage 14,4 V
Idling speed 0 - 2600 rpm
Impact rate 2400 - 3600 rpm
Max. torque Hard material (metal) 100 Nm*
Chuck clamping range 1,5 - 13 mm
Drill diameter max. Wood 13 mm
Metal 10 mm
Max. screw diameter in spruce Up to 8x160 mm
Tool holder in drill spindle 1/4 ’’
Weight without battery pack with Centrotec 1,2 kg