User Manual

3. Installation
3−16
Festo P.BE−SPC200−EN en 0901d
3.3 Additional pneumatic circuits
You may require additional pneumatic circuits in order to
attain a particular status for the system in cer tain applica
tions.
Please note
If the operating voltage supply for the SPC200 is switched
off, the proportional directional control valve type MPYE
will move to the mid−position. Due to the asymmetrical
voltage−pressure curve of the proportional directional con
trol valve when the supply pressure is switched on, the
slide can move slowly into one of the
end positions.
Additional information
The "Guide To Safety Technology" brochure contains detailed
information on:
 Directives and norms
 Machine guidelines and DIN EN ISO 13849−1
 Definition and concept of risk
 Risk assessment
 Directive−compliant procedure for safe design (as per
EN ISO 12100)
 Control architectures (as per DIN EN ISO 13849−1)
 Operating modes and safety functions
 Sample circuit diagrams
 Festo products
 Services
You
can request the "Guide To Safety Technology" brochure
in the Internet at:
è www.festo.com