User Manual

2. Fitting

2−19

Festo P.BE−SPC200−EN en 0901d

5. Tighten the screws. The fastening and the housing will

then be clamped firmly on the hat rail.

1 Fastening

2 Housing

3 M4x12 screw

4 Washer

5 Hat rail

Fig.2/11: Fitting the SPC−FIO−2E/2A−M8 onto a hat rail

Proceed with dismantling as follows:

1. Loosen the screws.

2. Remove the housing.

3. Use a screwdriver to lift the fastening out of the hat rail.

1 Screwdriver

2 Fastening

Fig.2/12: Dismantling the fastening